Zetina 6323 sewing machine mode knob gear
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This gear is meant as a replacement for Zetina 6323 sweing machine.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 428
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
Zetina 6323 sewing machine replacement gear which changes modes.
UPDATE 18.2.2024
After a great cooperation with sewing machine workshop in Slovakia and one of their clients, we made a better version with new measurements (thanks a lot to a great guys from Zvolen!)
- Printer: Original Prusa mk3s+ (properly calibrated)
- 0.2 nozzle
- 100% infill
- Use NYLON (we tested PETG, ASA and PC blend with no luck, material not strong enough), properly dried
- Print in enclosure (or temperature stable enviroment) due to a possible material shrinkage
- clean elephant foot (first layer) from inner diameter of gear
V1 (old version, use rather v2!)
Printed with Prusa i3 MK3s+ with PETG, however, use rather ABS/ASA/PCblend.
I used PETG Devil Design in .gcode, 100% infill.
Measurements are made to fit it as original. Fits and works with knob, however I haven't managed to reassemble the whole machine yet.
Designed in Fusion 360.