Hedgehog Flower Pot 200% scale
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Original .STL on Thingiverse by A_Sterling. Enlarged 200% for my wife as an Easter gift.
- Ocena
- 4 / 5
- Polubienia
- 84
- Pobrania
- 330
- Wydruki
- 0
- Wyświetlenia
- 2041
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
Original .STL on Thingiverse by A_Sterling. Enlarged 200% for my wife as an Easter gift. This was the very first overnight print on my i3 MK3s kit, and it came out beautifully in gold generic PLA. It was a very good test for rapid Y-axis travel, and I generated 33 Y-crashes during the print.
Print instructions
Gold generic PLA
Standard heat settings for PLA (210c/60c)
10% gyroid infill
200% scaled up from original
Normal mode (not stealth) - 12h37min print
0.10 'detail' mode selected
PrusaSlicer 2.0
Experienced multiple Y-axis crashes during this print. Suspect the rapid Y travel for the spines on this model are a good test for Y-axis agility.