M27 to M21 Socket Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A socket adapter to be able to use a normal 21mm Socket on a 27mm oil filter "nut". Needed this for a 2010 Ford Focus…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 172
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
A socket adapter to be able to use a normal 21mm Socket on a 27mm oil filter "nut".
Needed this for a 2010 Ford Focus 1.6 TDCI oil filter. Has a hole going sideways through the middle of it to be able to stick in a screw driver for torque if you don't want to use the upper socket, just remember it's still plastic, so if the oil filter is on too tight this might not work.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Yes
Supports:
Yes
Resolution:
0.2
Infill:
50 Cubic
Notes:
I actually printed this upside down with tree support and a thin brim since I thought the support area would be smaller that way, but even if I slice it the same way with normal orientation it seems to take about the same amount of material so it probably does not matter.
Category: Automotive