Kossel Roller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Since I really like the simplictic solution here…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 254
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Since I really like the simplictic solution here https://groups.google.com/forum/#!topic/deltabot/VM9439t1Ggc/discussion (yes, the site doesn't parse the URL properly), and I also have those Openbeam parts, I decided to try to create the kossel roller to make that design work. So far I've done what can be found here, but this is a work in progress. I decdided to put this here in the meantime, in case someone feels like improving or have anything else to improve this!
Main issue here is putting on the lower rubber band on the front... and I haven't tried this part yet... also, the holes for nuts for the rods needs to be larger...
Instructions
- Download
- Use
Use 4 M3 screws and 4 623ZZ bearings inside to have contact with the extruded aluminium. Tighten with rubber band.
Oh, and I'm using this as well: http://www.thingiverse.com/thing:21731
Category: 3D Printer Parts