Ender 2 Pro Raised Feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Some simple feet to raise the Ender 2 Pro up by 1 inch. Fit over stock rubber feet.
- Ocena
- 5 / 5
- Polubienia
- 55
- Pobrania
- 452
- Wydruki
- 7
- Wyświetlenia
- 1425
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
Some simple feet to raise the Ender 2 pro up about 1 inch and provide better air flow for the cooling fan. The top of the feet have a 1/8" pocket that the stock rubber pads fit into. No need to remove the stock rubber feet. The rear left foot didn't hit any of the zip ties on my machine but it might depending on how the wires were arranged at factory.
I printed 3 front feet. One is for the spool holder. The ones in photos were printed in Sunlu PLA Meta Red. The color is a bit lighter than the red knobs, etc on the printer but it's close.
Made in OnShape.