KT36/48 Controller Mount for Electric Bicycles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've designed a mount for the KT36/48 controller variant that is 40mm x 68mm x 130mm I've provided the Freecad model.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 331
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
I've designed a mount for the KT36/48 controller variant that is 40mm x 68mm x 130mm
I've provided the Freecad model.
I originally made this for a Gary Fisher bike conversion, I am not entirely sure if the bottle mount holes will work for anything if you edit the sketch with the named, slot_* variables you can modify the distance to make it work for variations on the bottle mount hole distances. they are I believe 73mm wide from screw hole to screw hole.
The original encloses the controller entirely, I wasn't sure how much I trust it to be weather proof. I printed this in ASA.
I created a second with the metal exposed, but I haven't attempted to use/print that yet.