Sinclair ZX80 Replica
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An accurate as possible ZX80 housing. With supports for printing on a standard FDM printer. Updated January 2022.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 382
- Wydruki
- 2
- Wyświetlenia
- 2101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
An accurate as possible ZX80 housing. Original made by 'alvaroalea' (
https://www.thingiverse.com/thing:1880449
). Modified to be printable on a standard 3D printer.
Updated January 2022: All walls now have a minimum thickness of 1.5 mm.
The Bottom section is available as a two piece part (for small printers) or as a single part.
Check my blog:
https://c-scope.blogspot.com/2020/03/zx80-replica.html
for details.
Featured on Hackaday to celebrate the 40th anniversary of the ZX-80 !
And also on Hackster.io. !
Though I only used it with a Raspberry PI emulator, I recently learned it can be used to build a real replica. Check out this video from the RetroShack:
https://youtu.be/wrAgdLYNKJo
He picked up this design and used it to pack a ZX80/81 replica board, which worked out great.