Droid Depot LED Sign
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Star Wars Droid Depot logo LED sign
- Ocena
- 0 / 5
- Polubienia
- 89
- Pobrania
- 305
- Wydruki
- 4
- Wyświetlenia
- 1451
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
Star Wars Droid Depot LED sign.
It has holes to hang on the wall and LED strips installed inside.
Print instructions for the top part:
Print in translucent or white with 0.2 layer height and make a filament change at 0.4 mm. So first two layers will be translucent.
If your printer does not support M600 for filament change (like my Anycubic Kobra Max) I uploaded a splitted version (v2):
If you are using Cura slicer you must have installed Z Offset plugin.
Print the file “v2 - base first 2 layers.stl” in white or translucent. Then print in black or another color the file “v2 - black print with 04mm z offset” with 0.4mm Z offset, so it will be printed on top of the white part (remember to turn off skirt / raft / border).
Scale X and Y to fit small printers, keep Z scale
Layer height: 0.2mm
Supports: No
Once printed install a LED strip:
https://a.co/d/9wd9ED6