Pestle Rotational Bowden
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rotating X-Gantry mounted bowden system for shortest PTFE possible.
- Ocena
- 0 / 5
- Polubienia
- 39
- Pobrania
- 46
- Wydruki
- 2
- Wyświetlenia
- 1689
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Pestle Rotational Bowden
This extruder mounts on the X-gantry and is capable of rotating. This new mounting location cuts approximately 50% of your bowden length off, and also rotates to further take bend radius out of the PTFE pathing, the end result is a bowden length of -50-60% compared to traditional mounting solutions. Currently working on various brackets to adapt this system to many more printers from Enders to Prusa's devices.
EX: Ender 3 Bowden length will be under 200mm total distance.
For support or to follow the other projects, please join the Discord below or visit the Github.
https://discord.gg/aE49DW2xXe
https://github.com/Alchemical-3D/BETA_Pestle_Rotational_Bowden/blob/main/README.md
Do not forget to share your makes!
PRINT SETTINGS
Materials - ABS/ASA (Note: The parts are designed accounting for shrinkage of ASA & ABS, other filament types may or may not work.)
Layer Height - 0.20
Extrusion Width - Forced 0.4m
Infil Percentage - 40%+
Infil Type - Grid, Honeycomb, Triangle, or Cubic
Top/Bottom Wall Count - 4
Perimeter Count - 4
B.O.M.
KB-3D and Alchemical-3D have collaborated to create configurable kits to buy everything you need for Pestle. If you do not have or do not want to chase down all of the parts, you can get it all here with a few clicks!
Configurable Kit for Pestle Bowden through KB-3D
Note: This is the bare minimum, it is wise to have spare screws/heatsets etc.)
QTY - 7 - M3x5x4 Heatsets (Be sure to get angled exterior texture, not straight)
QTY - 2 - Thrust Bearing 5mm ID
QTY - 1 - M3x16 SHCS (Socket Head Cap Screw)
QTY - 1 - M3x20 SHCS (Socket Head Cap Screw)
QTY - 2 - M3x30 SHCS (Socket Head Cap Screw)
QTY - 2 - M3x35 SHCS (Socket Head Cap Screw)
QTY - 3 - PC4-M6 Bowden Connector
QTY - 1 - BondTech BMG Extruder Internals Kit (Some clones have the correct components for this build internally)
QTY - 1 - Nema 14 High Temp Stepper Motor
Highly Recommended Items Below
QTY - 1 - Threadlocker (Loctite Blue or similar strength, its important to note that threadlockers WILL damage ASA/ABS if they come in contact, take care when applying thread lockers that it only gets on the metal assembly.)
> ☕ Did you find this helpful? https://ko-fi.com/alchemical3d
](https://ko-fi.com/alchemical3d)){kind=link}