Double Twist Light Shade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A glass like cover to enhance the light of a chandelier that has a twist that then goes back on itself
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 97
- Wydruki
- 1
- Wyświetlenia
- 716
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Our dining room chandelier had a 80's look and we thought this was due to the fake candle-like structure that held the light bulb. So I covered it up with a light shade printed in clear PETG, so they look like glass covers.
I formed it from a twist that twists back on itself midway through, it then smooths out to a circle.
This is printed in vase mode with the thickness enhanced to make it stronger, but not so thick that it looses its gloss finish.
WARNING: Use only with LED and similar or lower low wattage bulbs. Incandescent bulbs will melt PLA and PETG plastic.