1 / 2
LACK Filament Tube (captive PTFE tube)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament passthrough tube for LACK enclosure with captive PTFE tube.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 91
- Wydruki
- 1
- Wyświetlenia
- 657
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (30)Powiązane
This is a low-profile filament pass-through tube for a LACK printing enclosure (50 mm thick).
It is designed to hold a captive piece of PTFE tubing (4 mm ID) inside for a smooth run, and printed threads hold the assembly snug to eliminate any rattle.
For installation, a 9 mm clearance hole is required.