Mosaic Palette2 Hemera(PTFE) connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To my surprice I could still not find a cool PTFE to Palette2 connector. So I did.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 617
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
To my surprice I could still not find a cool PTFE to Palette2 connector. So I did.
It's quite simple: you need a pneumatic connector, whose M6 thread is screwed onto the Pallete2 piece. And the rubber 'washer' given by mosaic.
I cutted the thread myself (the file with 5mm hole is "..withoutthread.stl"), but for the sake of completeness I added an M6 thread to it in Fusion360 (the 2 other files). But the latter is untested!
Print instructions
I used PETG and took 3 perimeters (for cutting the thread) but PLA and 2 perimeters probably work, too