Nidecker concept 2019 snowboard bumper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I bought a Nidecker concept 2019 snowboard for this seeson, unfortunately someone hit the front of the board leaving a…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 1048
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I bought a Nidecker concept 2019 snowboard for this seeson, unfortunately someone hit the front of the board leaving a big scratch.
Because al the snowboard bumpers in the store are either to bulky or has to be attached to the board with screws I decided to make my own. This bumper is glued on with a hot glue stick, this makes it better to replace if it is damaged.
Print instructions
I printed this with a 0.6 nozzle attached to the printer. This bumper can be printed with a 0.4 nozzle as well. To be able to print this object you need to turn on support.