1 / 8
Filament Cutter 45° 60° 90°
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament cutter with three angles
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 150
- Wydruki
- 3
- Wyświetlenia
- 1478
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 3) (Komentarze: 4)Remiksy (0)Kolekcje (82)Powiązane
Taglia filamento con tre angli di taglio.Sono presenti due fori per poterlo fissare ad un piano.
Servono:
2 molle 6x20 mm
2 brugole 4x20 mm
1 segmento da lama a scatto 18 mm
No rafts, no supporti, riempimanto 20%, layer 0,2mm, PETG o PLA
Per il montaggio fare riferimento al modello di remix.
Filament cutter with three cutting angles.There are two holes to fix it to a plane.
You need:
2 springs 6x20 mm
2 Allen screws 4x20 mm
1 segment from 18 mm snap blade
No rafts, no supports, filling 20%, layer 0.2mm, PETG o PLA
For assembly refer to the remix model.