NeoPixel Ring with Raspi Cam with added 80mm stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I added a stand to this very clever design by Habales. printed at .1mm because of the tiny pegs to hold the raspi cam.…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 129
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I added a stand to this very clever design by Habales.
printed at .1mm because of the tiny pegs to hold the raspi cam.
25% infill.
I know there is no joint to pivot the camera, (next one will have that) but for now, i was thinking i would immerse the stand in boiling water, and simply bend the stand to an appropriate angle, then mount it. :)
Print Settings
Printer Brand:
MakerBot
Printer:
MakerBot Replicator 2
Rafts:
Yes
Supports:
Yes
Resolution:
.1mm
Infill:
25%
Notes:
I will post a picture when the print is done. :)
this is for my dog treat dispenser.
Category: Electronics