Tailstock anti-roll mat TPU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I set stuff on my tailstock. Center drills, drills, drill chucks, oil bottles, etc. Print this from flexible TPU, PLA,…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 1
- Wyświetlenia
- 194
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I set stuff on my tailstock. Center drills, drills, drill chucks, oil bottles, etc. Print this from flexible TPU, PLA, ABS or whatever, and glue it down with a few dabs of RTV and you'll no longer have things roll off, ding your ways or get lost. Fits my Birmingham YCL1340gh. Also fits the grizzly g4016. The 2 1/4" holes are to allow access to the oil fittings.
I used TPU with 30% infill.
It's 7-7/8" long by 1-7/8" wide, and has a small pocket at one end for center drills.
Print Settings
Printer Brand:
FlashForge
Printer:
Creator Pro
Rafts:
No
Supports:
No
Resolution:
0.16
Infill:
30%
Filament: Polymaker Polyflex TPU Black
Category: 3D Printing