Moving Horse
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified version of Horse, Prototype by gzumwalt, using a manual crank instead of a motor. All files and build…
- Ocena
- 4 / 5
- Polubienia
- 259
- Pobrania
- 870
- Wydruki
- 4
- Wyświetlenia
- 5408
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Modified version of Horse, Prototype by gzumwalt, using a manual crank instead of a motor.
All files and build instructions are the same as gzumwalt's Instructable, except for Gear+Worm.stl, and Base_Box.stl+Base_Stand.stl instead of base.stl and Housing+Motor.stl.
The following files have also been added:
Bevel_Gear_Side.stl
Bevel_Gear_Spacer.stl
Crank.stl
Link to Instructable: https://www.instructables.com/id/Horse-Prototype/
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Notes:
Follow the print settings from the Instructable (Amount of each file to print and print settings).
For the Gear+Worm, PLA supports worked fine.
Post-Printing
Assembly
Because of the bevel gear attached to the worm gear in the new version, be sure attach base_stand to base_box first, and then insert the worm gear from the bottom. Then follow gzumwalts instructions.
When finished with the horse assembly, attach Bevel\_Gear\_Spacer to Bevel\_Gear\_Side and try to insert it into the hole on the side of base\_box.
Final step is to force the idler wheel on crank.stl free, and snap it into its place on Bevel_Gear_Side
Category: Animals