MBS Matrix II Shredlight mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slight remix of the original MBS shredlight mount. The original didn't fit my SL300 lights (the light bottomed out…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 241
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Slight remix of the original MBS shredlight mount. The original didn't fit my SL300 lights (the light bottomed out inside because of the closed back and couldn't fully latch in. This version has an open back so the light can click in completely. I also squared it off on the back end so it had a flat stable platform to get started on the print. I printed them in PETG and you can use an M8x25 screw to mount on MBS Matrix II trucks. Printed with tree supports.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.2 layer height
Infill:
30%
Filament: Overture PETG Black
Notes:
I printed at 235 / 65 bed temp / 35 speed. Tree supports. Skirt around print.
Category: DIY