Mount for 6.5mm (1/4") water pipe for fridge or similar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clip to hold in place (under the kitchen cabinets) the 6.5mm or 1/4" flexible pipe - that supplies water to my fridge.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 216
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
The water / ice dispenser in my fridge is plumbed in via a 6.5mm (1/4") water pipe/hose, which runs under the kitchen cabinets. I found the commercially available ‘hose clips’ to be too small and over time they would drop off, so I designed this longer clip/mount as a replacement.
The much larger surface area gives a better bond to the kitchen cabinets, and the longer length better counters the flexible hose's propensity to twist.
The hose / pipe will just clip in and hold even upside down under the kitchen cabinet but there are cutout to add cable ties for extra security should you want / need them.
I have used 3M VHB tape to mount the clips to the kitchen units.