Claw (Filament Joint)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom Filament jointed claws my Niece and I created as a side project for our print of Lung Oriental Dragon by 7Fish…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 573
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution
Custom Filament jointed claws my Niece and I created as a side project for our print of Lung Oriental Dragon by 7Fish
*Warning some filaments are flammable, a safer method of melting the ends could be a soldering iron plus flat piece of metal as seen in my 3W grow light project
*Updated 7/18/2019 to fix interference issues with claw
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Yes
Supports:
Yes
Filament: Generic PETG Post-Printing =============
Tools needed to complete (note each claw requires 4 "fingers" to be printed)
Insert 1.75 mm filament through the joints
Trim then apply heat (via flame or other source) - caution some filaments are flammable - a safer method might be to use a soldering iron or other heated object
Press the end of the heated filament using a metal object
With filament ends melted and pressed it forms a fairly robust movable joint
Fingers are completed in a similar fashion but filament runs through all 3 front fingers
Category: Creatures