Taranis QX7 Battery Door With Extra Room
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement for the standard QX7 battery door, designed to be printed on an FDM printer. Has some small details but…
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 113
- Wydruki
- 2
- Wyświetlenia
- 369
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Update: Updated the feet to allow the transmitter to sit flat on a flat surface, filleted the thumb grips for printing in the face down orientation
A replacement for the standard QX7 battery door, designed to be printed on an FDM printer. Has some small details but it should be feasible to print, it does require support for printing on either side however.
Tell me if you like it, I put a little thought into design accuracy and detail, and had fun making it.
It has a little extra room to fit a 3s lip into the battery bay, with the stock battery door it would not fit.
Some tips:
-Should be printed with the outer side down on the build plate, will lay flat
-Supports required for the top three tabs, as well as the bottom two tabs.
-Do not use supports for the recessed grip grooves, you might not ever get it out.
Print Settings
Printer:
Kodama Trinus
Rafts:
No
Supports:
Yes
Resolution:
0.14 Layer Height, 0.4 Nozzle
Infill:
%100
Filament:
Overture PETG
Space Gray
Notes:
-Should be printed with the outer side down on the build plate, will lay flat
-Supports required for the top three tabs, as well as the bottom two tabs.
-Do not use supports for the recessed grip grooves, you might not ever get it out.
Category: R/C Vehicles