1 / 2
Extra tall Lack riser 215mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed a super tall riser after throwing a block under my Ender with damping feet.
- Ocena
- 5 / 5
- Polubienia
- 86
- Pobrania
- 304
- Wydruki
- 1
- Wyświetlenia
- 2052
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (122)Powiązane
There are holes for screws but I found they aren't needed at all.
