Pool Fence Extenders and Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pool Fence Extenders and Spacer. I Came up with this design when shovelling dirt under my pool fence to meet the new…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Pool Fence Extenders and Spacer.
I Came up with this design when shovelling dirt under my pool fence to meet the new regulations set out by my lovely Government.
I thought there has to be an easier way.
The regulations stated that the fence had to be under 140mm from the ground at all places.
I made the design with a hole in the middle to insert a metal rod( 8mm-8.2mm) for extra strength.
I have made multiple lengths up to 100mm.
Insert the assembled extender up the bottom of the vertical posts with a heap of silicone.
I also made a 8mm spacer for a side fence that was coming away from the post due to the movement of the boundary fence.
I passed regulations and the printer has saved me time and money on repairs.
Cheers.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
40%
Filament: Pantech PLA Does Not Matter
Category: Outdoor & Garden