Edison Lamp Base Repair
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I found a floor lamp in hard rubbish that was damaged. I realised the damaged part was something I could design and…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 171
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I found a floor lamp in hard rubbish that was damaged.
I realised the damaged part was something I could design and print.
The whole shade attachment was dependent on the base of the Edison fitting. Especially the clips that fix the top to the base.
I design the fitting in two parts to strengthen the clips, I tried numerous prints with the base printed in one, but all snapped.
Thread mount is 10mm X 1mm.
I lightly sanded the front bottom section of the pins and superglued them in place one I was satisfied with my print.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Supports:
No
Resolution:
0.2
Infill:
40%
Filament:
Pantech PLA
Does Not Matter
Category: Replacement Parts