Barista small knockbox for espresso coffee machines with a piston
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small knockbox (110 * 110 * 100 mm) with lid for barista piston portafilter.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 463
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Narrow knockbox (110*110*100mm) with lid for barista piston portafilter.
At the bottom are 6 recesses of 10 mm in diameter for anti-slip feet to ensure that the box does not slip and to absorb the stroke vibration during the knocking out of the piston.
I printed it with TPU filament, but felt caps for furniture will suffice as well.
I printed the box, yoke and lid with PETG filament, but any other non-flexible filament is also possible.
Only the lid needs support.
The box and lid 0.2mm layer thickness with 10% infill.
The yoke 0.2mm layer thickness with 50% infill.
The non-slip feet with TPU, 0.2 mm layer thickness and 100% infill
Enjoy a fragrant and tasty cup of coffee.
