Small Mini Sanding Block - chamfered and 0.67in / 17mm wide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small version of the Mini Sanding Block, for better printability with FDM. (original model was for resin)
- Ocena
- 4,625 / 5
- Polubienia
- 90
- Pobrania
- 483
- Wydruki
- 7
- Wyświetlenia
- 1977
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Another Remix, just because one of the standard sizes in germany for sandpaper (230mm x 96mm) lets me cut 2 sandpaperstrips out of it, but lets me with one strip of 230mm x ~16mm left.
And so i decided to make a shortcut version of this thats 17mm (0.67 inch) wide, and also to edit this version to only use one M3 screw.
I put the original file also in here, and edited that for better printing with FDM (original was optimized for resin).
EDIT: i also added a version without any chamfer, maybe for bigger nozzles? You are welcome :)
Happy printing!
P.S.: This is a remix of “Mini Sanding Block” from JustIgnorant on thingiverse.
Sadly i cant link to it here, but you find it on thingiverse.