Villeroy & Boch Squaro Infinity chrome strip holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement part for Villeroy & Boch Squaro Infinity shower tray.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Share Alike
The original small plastic feet broke. I modeled and printed a couple of replacement ones; let's see how long they will last.
The 2 strip holders have to be pushed in place using a manual press or a vice. They fit very tightly (this is what I was looking for).
If they happen to break, drilling them with a 2,5mm drill should do the job.
I taped in M3 the holes of the chrome strip to add a bit of structure and friction but this might not be really necessary.
Print settings: PLA, 0.15mm, 100% infill, no support, 5mm brim.
EDIT: with my printer settings and filament the pin of the first version is too fragile. v2 brings more rigidity and ensures less torque is applied on the pin.