The finvase - nicely scaleable vase, also with a triplevase inside
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made a basic vaseshape, thats easy to scale and also is superrigid through the findesign. Print hint at description.
- Ocena
- 4,935 / 5
- Polubienia
- 1133
- Pobrania
- 3273
- Wydruki
- 36
- Wyświetlenia
- 14 322
- Oceny
- 31
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
I modeled this vase after i did the luxury vase, because i wanted one thats easier to scale.
I also made a tripleversion of this, and changed the design a tad for that. Looks also amazing printed. :)
Prints best with an 0.6 or 0.8mm nozzle and a wallwidth of 1.2mm.
If you have to go with a 0.4mm nozzle, please note that vasemode can be used with double the layerwidth, and you should use that for these (and all other) vases if you print with a 0.4mm nozzle. So, simply set the layerwidth to 0.8mm.
Happy printing!