STOMP! spring Creality CR-10 S5 Distances for Spring Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
In case you have an auto bed levelling (like BL Touch) in place the springs on the levelling screws can be replaced…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 55
- Wydruki
- 1
- Wyświetlenia
- 440
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- GNU General Public License v3.0
In case you have an auto bed levelling (like BL Touch) in place the springs on the levelling screws can be replaced with this tubes in order to firmly attach the print bed to carriage since the springs and screws are no longer required to level the bed. This reduces wobble induced by the heavy bed moving on the y-axes sled and by that possible shadowing on the printed objects.
Please note, that you should reduce acceleration to 500 - 800 and jerk to 5 - 8 in order to reduce stress and motion induced kicks on the mounts and carriage.
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
No
Resolution:
0.15
Infill:
100%
Filament:
Any PLA
Notes:
Use your standard settings for PLA, no special requirements.
Category: 3D Printer Parts