1 / 3
USB Cable Stand For Desk Edges (Tape or Glue Mounting)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
There are many of these out there, but I needed one to accommodate slightly thicker cables and this worked for me.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 124
- Wydruki
- 1
- Wyświetlenia
- 454
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (21)Powiązane
This is a simple usb desk-edge holder to organize frequently used cables. I made it able to accommodate thicker cables.
Print at 0.2 or 0.3mm, no supports.
Use double sided tape or hot glue for mounting.