Even longer simple articulated snakes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modification to my old articulated snakes that I’ve designed to curl very tightly to maximize the length!
- Ocena
- 4,8 / 5
- Polubienia
- 76
- Pobrania
- 1392
- Wydruki
- 6
- Wyświetlenia
- 3915
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
This is a modification of an older model I posted as I wanted to see what the limits of printing long articulated models could be, turns out, it’s a lot!
There are 5 models in this pack:
A 1 segment test model you should print before trying any other models to see if you need to scale the snakes up for it to be fully articulated
A 32 segment model that you should 100% print before going any larger (≈1 foot)
A 64 segment model (≈2 feet)
A 127 segment model, will fit printers with around a 220x220 bed side without scaling (≈4 feet)
A 253 segment model, for larger format printers such as the CR-10 and can be scaled up for a little over 8 feet in length!
if there is enough demand I will ATTEMPT making a 500 segment version however fusion 360 can barely handle modifications to my 253 segme version and I have to turn all the segments manually.