1 / 3
2 inch EMT insullated bushing — zdjęcie 1
1 / 3

2 inch EMT insullated bushing

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Cap goes on the end of a EMT electrical conduit to protect wires inside from getting skinned on the sharp metal edge.

Ocena
0 / 5
Polubienia
5
Pobrania
52
Wydruki
0
Wyświetlenia
245
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Built this for my personal use to keep cables I run in the chase way in my house from getting scraped up. It has a good friction fit so it won't pull off if you pull against it the wrong way. If you want it to be completely permanent, put a bit of caulk in the groove before you press it on. Printed in PETg. No guarantee this is to code or suitable for your purpose.