Subaru Outback BP turn signal connector dust cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have bought white/yellow WY21W switchbacks for DRL on my 06 Outback. I do not like to see connector unprotected or…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have bought white/yellow WY21W switchbacks for DRL on my 06 Outback. I do not like to see connector unprotected or covered by electrical tape. So I made simple cover that also hold resistor (M3 screw) and could by mounted with M6 bolt or ziptie. Hole for wires is sealed with hot glue / silicon sealant. On left side I had some empty holes on bracket behind batery so I could mount it with screw. On righ side I had to mount it with zip tie on back side of bracket between headlight and airbox.
Print Settings
Printer Brand:
Anet
Printer:
E12
Rafts:
No
Supports:
No
Resolution:
200
Infill:
38
Filament: PrintWithSmile PETG Gray
Category: Automotive