Small hinges (for fusebox door)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Set of small hinges to replace the broken hinges on the door of my 30 year old fusebox. Created in Onshape
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 298
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
The hinges on the door of my 30 year old ABB Vynckier fusebox broke and needed replacement.
One part of the door still has the original rod to clip into (part 1) and the other one was broken too so I designed a new complete hinge (part 2 and 3). Both hinges should swing around the same centerpoint so the door opens evenly. When installing / gluing, consider the orientation of the bottom part so the protrusion point upwards and your door does not fall down when opening :)
Hole is sized for a self-tapping screw to fix the hinge into the fusebox.
Printed in PETG because PLA proved to be too brittle when snapping the hinge in place.