1 / 4
1/2" Socket holder for 10mm to 19mm. Also 20 to 27mm and blanks
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Every socket holder is either straight up or side. This is with angle to get good grip with fingers.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 170
- Wydruki
- 0
- Wyświetlenia
- 843
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (24)Powiązane
Made this because I wanted sockets to be in angle and not straight. Nor up or side. I can get a good grip and sockets won't fall down even when this holder is in my trucks wall. Added new socket holder for 20-27 millimeters.
Printed this with PLA
Supports only for screw holes.
Infill as you want. Used 20%