Dowel jig for 2x4 lumber (openscad file attached)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Doweling jig for 2x4s. Make sure the jig is clamped in place securely before drilling your holes. The example picture…
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 145
- Wydruki
- 1
- Wyświetlenia
- 1751
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Doweling jig for 2x4s.
Make sure the jig is clamped in place securely before drilling your holes.
The example picture attached isn't the best because I had used a forstner bit and the dowel holes ended up not being straight. For best results don't use a forstner bit ... once the head goes through the dowel jig the remainder of the bit is narrower in diameter and so the jig no longer acts as a guide. Use a normal bit instead.
For the spacers I used these 1/2" spacers with (5/8" outer diameter) available from Lowes https://www.lowes.com/pd/Hillman-1-2-in-x-5-8-in-Plain-Steel-Standard-SAE-Flat-Washer/3012480
I wouldn't use the same spacers next time. Sometimes they would catch on my drill bit (not fun). Instead I would look into getting some oil-embedded bronze sleeve bearings from McMaster-Carr https://www.mcmaster.com/catalog/125/1232. I use those for my pocket-hole jig and they work great.
I attached some grip tape to both sides of the neck of the dowel jig https://www.homedepot.com/p/3M-4-in-x-15-ft-Safety-Walk-Step-and-Ladder-Tread-Tape-7636NA/100211722. I thought it might help keep things from slipping, but probably not necessary.
I uploaded the openscad file so you can tinker with the dimensions (sorry I didn't spend anytime cleaning up the code).
Here's the depth stop I have on my drill bit: https://www.thingiverse.com/thing:2783491
Category: Tools