Half way to Voron 2.4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is milestone for building Voron 2.4 3D printer using parts from Creality Ender 3 Pro.
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 1591
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is milestone for building Voron 2.4 3D printer. It uses most of the parts from Creality Ender 3 Pro 3D printer.
Designed for 400mm linear rails as specified in BOM of Voron 350mm, should be also compatible with 350mm rails.
Design consist of four main sections:
- X gantry and hot end, uses Voron afterburner
- Z axis Belt conversion, double Z motor
- Y axis Linear rail conversion
- PSU relocation and electronics upgrade, Panels in front have mounting holes for raspberry pi 4 and fysetc spider 1.1 board
Known issues:
- original Y motor bracket interferes with back skirt, provided bracket haven't been tested
- due to difference in Y offset for afterburner print area is shortened by 2cm in y axis, this will be fixed by changing location of belt attachment, currently original y plate.