Baseboard holder for gluing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Helpers to hold baseboards in place while gluing
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 158
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
For gluing our baseboards to the wall, I designed some helping holder onto which some weight can be put to hold the said boards in place.
As you can see in the pictures we used soda bottles as weights as a bottle is an easy weighted object that should be available almost always.
Our baseboards have are dimensioned 50mm x 16mm so I made the holders with 50mm vertical spacing and 15mm horizontal spacing. The 1mm gap is that they do not directly press to the wall instead of pressing against the baseboard.
I printed 4 of them at once in PETG with a 0.8mm nozzle and 0.55mm layer height as I just needed them quickly.
Other materials and layer settings should do the job aswell.