Sofa Bed Back Rest Metal Protector 50% and 100% Attachment (Cocoon)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Sofa Bed "attachment" is for sofa beds that are experiencing tear around regions between the fabric and metal joint.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 189
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution
The Sofa Bed "attachment" is for protecting the fabric from the metal part that connects the backrest for the Sofa Bed. Please note that this attachment was designed for the cocoon alice sofabed and might not work with other sofabeds that use a similar rotary design. This is the smaller version and therefore moves around more. There is another model I created, please have a look if you're interested in a more updated design that moves around less and covers a larger surface area for keeping the screws away from the material (version 1.0).
When printing the model you might want to change the perimeter count to 2 instead for a faster print time and maybe changing the print speed to 70mm/s so perimeters get printed faster but that is all up to you. Oh and make sure you don't print the wrong piece as one is different from the other. Thank you and leave a like if you want. Both, good or bad feedback is appreciated. :D