Ender 3 Z-Probe Mount with E3Dv6 Hotend
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I really liked the thing from terenceang (https://www.thingiverse.com/thing:3293821) as I already had a lot of the…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 197
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I really liked the thing from terenceang (https://www.thingiverse.com/thing:3293821) as I already had a lot of the things needed for this. However it was for the stock hotend and I have a E3Dv6 Clone on mine.
I didn't want to mount it on the right as I wanted to measure most of the bed. I modified the mount to clear the endstop and still mount on the left.
As for configuration/firmware changes, terenceang works if you have the stock board. I do not have the stock board anymore and running a MKS GEN L board and majority applies.
Current pictures are of the last prototype before finalizing the design. Will take better pictures of the mount when I get a chance
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
25
Filament: ColorMe3D PETG Blue Post-Printing =============
Mounting
To mount it, you'll need to remove the top left wheel as it utilizes the screw as one of the mounts. You'll also need the another screw to mount it when the stock hotend cover mounted.
Category: 3D Printer Parts