Ender 3 S1 Pro Wyze Camera V3 Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wyze Cam v3 mount for the Ender 3 S1 / Pro (only tested with the S1 Pro). Fits a Wyze cam v3 perfectly and at an…
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 378
- Wydruki
- 3
- Wyświetlenia
- 2419
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wyze Cam v3 mount for the Ender 3 S1 / Pro (only tested with the S1 Pro).
Fits a Wyze cam v3 perfectly and at an optimal viewing angle. (Will not fit Wyze Cam v2 or older models)
Mount fits the left side of the machine, can be flipped before printing if you want it on the right side (Have not tested or looked into it).
Print Settings
Printer:
Ender 3 S1 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
15%
Filament:
Hatchbox PLA
Black
Notes:
Supports are used just for the screw holes. as the lip that holds the bolts in is on the thin side to fit the original screws. I did not print with supports but it did not come out clean. Supports would help ensure the hole prints fine. (See picture with orange line).
Infill used was 15%, feel free to change as you please. 15% is fairly strong while keeping time down.Print flat as shown in pictures.
Category: 3D Printer Accessories