The Frankenstein Swing Set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Frankenstein Swing set is a family friendly Halloween decoration standing almost 12" tall with functional swings.
- Ocena
- 4 / 5
- Polubienia
- 45
- Pobrania
- 79
- Wydruki
- 2
- Wyświetlenia
- 497
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
Get ready to family friendly Halloween with one of the great classic movie monsters: the Frankenstein Swing set!
Here we have legend himself lending a helping hand (or arms) to some of the local creatures of the night for a midnight swing ride. This decorative sculpt has a detailed yet cartoonish looking facial features, stands almost at 12" tall, twistable hands, and full motion swinging action. It is a must have for all the little trick-or-treaters to further enjoy and get into the spirit of Halloween.
If you like this print, please visit my Facebook page to see my other 3D sculpts and Prints:
Scenestruck Art | Facebook
Let me know if there are any problems with the model. Constructive feedback is always welcome.
Notes:
- FDM only print (Large pieces).
- Ignore any non-watertight warnings in slicer.
- The "Legs" should be printed at a denser infill (25-30% or more) to keep steady when swings are in motion. Another option is to secure tightly to a base (glue, screws, etc.)
- Recommend printing the "Head" upside-down, although it is not a flat surface, so support is still needed.
- The "Iron Rings" are twisted onto the arm and into position. If you can't, I recommend adjusting the size up by .1mm scale (not scale %). Same rule applies for the "Pegs" whether they're too loose or too tight (current scale works for me, so I apologize in advance if you waste filament on printing a second time).
- Most parts should be glued together.