1 / 5
Atomizer and Unicorn Bottle Stand with Drip Tips
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a slight modification of maxjenius' design. I've added a drip tip stand, allowing you to hold up to 9 drip…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
This is a slight modification of maxjenius' design.
I've added a drip tip stand, allowing you to hold up to 9 drip tips.
I've increased the size of the female joint by 0.2mm - they still fit very tightly, but with no clearance I cracked some of the pieces trying to hammer them together.
I decreased the size of the atomizer holes from 8mm to 7.4mm - this seems to fit mine much better. Still completely lose, but tight enough they don't tip as easily.
Category: Organization