Axe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A two part press fit Axe based of a Pittsburgh 1 1/4 Axe, I made for my little brothers project about St. Joseph.
- Ocena
- 4,5 / 5
- Polubienia
- 51
- Pobrania
- 667
- Wydruki
- 8
- Wyświetlenia
- 1737
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Public Domain
I made this based of a Pittsburgh axe in my High school wood-shop(axe photo not the original axe), along with a press fit hammer for my brothers project, he got a B+ on the project, and then one of the kids in his school broke both and through them away. I didn't even get to take a picture of them with his project. I'd like to thank Lemgo for letting me use his photos for my post.
Print the parts at 210 Celsius, the bed was at 60 C, 15-25 infill, speed set to 90%, fan speed at 50%, and minimal support. You shouldn't need support in the hole of the Axe head, granted i this is my machine.