1 / 1
SCX24 low cg battery tray
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I didn't put any holes for screws, I just made them with a hot needle. also you can set the rear height depending on…
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 165
- Wydruki
- 0
- Wyświetlenia
- 1839
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (59)Powiązane
I didn't put any holes for screws, I just made them with a hot needle.
also you can set the rear height depending on your shocks, because it will pivot on the front mounting.
I used a Bic lighter to for it a little once it was installed, mostly because of the Velcro strap
These Batteries fit
Turnigy Nano-Tech Plus 500mAh 3S 70C Lipo Pack w/XT30
ZIPPY Compact 350mAh 3S 25C Lipo Pack
Category: R/C Vehicles