D&D 2-Sided DM Screen Combat Initiative Tracker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print 2 at a time. Click 2 together. Use glue if needed. I used superglue. Insert something unique into the tracker so…
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 115
- Wydruki
- 0
- Wyświetlenia
- 1184
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
Print 2 at a time. Click 2 together. Use glue if needed. I used superglue.
Insert something unique into the tracker so that you can keep your combatants straight.
There is room for a 30mm X 30mm piece of paper or picture. Can be folded one or more times if you like. The window opening is 25mm X 25mm.
100's of ways to do this, but I used HeroForge to make my players' minis and took a screen shot from the site. I then used Inkscape to resize and duplicate the pics. Print, cut out, fold, insert, done.
You could make an army of (insert mob name here) and print them all out on one page.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
.20 layer of better
Infill:
25%
Filament: Hatchbox PLA any
Category: Games