1 / 3
Wall Mount for Cardboard Cat Scratchers
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Does your cat dislike those cardboard scratchers when they are on the ground? Flip them vertically with these brackets!
- Ocena
- 5 / 5
- Polubienia
- 97
- Pobrania
- 249
- Wydruki
- 2
- Wyświetlenia
- 2003
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (1)Kolekcje (160)Powiązane
These brackets allow you to mount those cardboard cat scratchers to a wall. I made these because my cat (Lily) doesn't like them when they are on the ground, but she sure loves them on a wall. The things we do for our pets <3
Printing Notes:
- I printed these in PLA at a 0.28mm layer height
- See photos for approximate dimensions. You may need to scale the file to fit your cardboard scratcher.
- Another option is to print as is and shave down the cardboard.
Mounting Notes:
- I used 4 - 1" screws. It's best to use screws that have threads all the way to the head of the screw.
If you print this model:
- Please, please, please! Post a make photo of it being used. I would love to see all of your cats :)