Elevated Print in Place Phone Holder!(Upper part only)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a improved phone holder from Turbo_SunShine. I increased the phone angle and increased the size of the tooths…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 242
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a improved phone holder from Turbo_SunShine. I increased the phone angle and increased the size of the tooths so the phone wont fall out so easy. It works great with a Galaxy S8, S10 and A40. Other phones arent tested. You have to print the elevator first. To fit phone holder and elevator together you need to cut a small piece out of the rail where the phone holder can slide. Then it will fit perfectly. I also included a elevator with that cut already inside. To print this thing you need to follow the instructions of Turbo_SunShine on youtube (https://youtu.be/TPQqFZdLm9o )
Print Settings
Printer:
Artillery Sidewinder X1
Rafts:
No
Supports:
No
Resolution:
0,15
Infill:
20%
Filament:
Formfutura Premium PLA
Frosty White
Category: Mobile Phone