1 / 3
(UPDATED) PS5 headphone holder and base for Dual Sense charging station — zdjęcie 1
1 / 3

(UPDATED) PS5 headphone holder and base for Dual Sense charging station

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A base that hangs the Pulse 3D wireless headset over the Dual Sense charging station.

Ocena
5 / 5
Polubienia
61
Pobrania
327
Wydruki
4
Wyświetlenia
3311
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Share Alike

Updated design with a better fit between the top and base. 

----------------------------------------------------------------------

This headset hanger has a base that blends into the Dual Sense charging station. There is a hole in the the back to pass through the power cord to the charging station. 

Print the base as it sits. Print the hanger arm laying on its side. The two pieces should fit together without and adhesive, but printing results vary with printers.  I split this into pieces that would fit on my printer. If you need this split differently, please let me know.

Note: the image shows the PlayStation logo near the top of the hanger, but I moved it down to the middle in the uploaded model. 

Tagi