Fully Portable Mynt3D Workstation
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prints comfortably on an Ender 3. Designed for the mynt3D pen, but could be adapted for different pens. Contains a…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 267
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Prints comfortably on an Ender 3.
Designed for the mynt3D pen, but could be adapted for different pens.
Contains a place for a battery to rest, for complete portability, and a wire running guide. Battery can be affixed with some stick-on Velcro.
Wire and filament come out the right side, so they are both out of the way.
The entire model can be mirrored/flipped in your slicer to make it left-handed.
Also includes:
- A guard to protect things from touching the pen's hot end while it's in the cradle
- A set of guides for the filament to run through.
- A set of pegs to wrap any extra power wire around, to keep things nice and tidy.
The print bed is 160x160mm. I used one of the freebie stick-on Overture mats, and cut it down to size so the numbers are visible on the top and left sides.
Category: 3D Printing